Multi-Surface Acrylic Sealer

Proudly Protecting

Interior and exterior surfaces against water and chloride intrusion, Mechanically-textured concrete, Exposed aggregate and stone, Walkways, Driveways, Patios, Balconies and Basements.

acrylic-sealer-sealer2-667x352.jpeg

Multi-Surface
Acrylic Sealer

acrylic-sealer-sealer1-667x352.jpeg

Weatherskin Acrylic Sealer is a solvent-based formulation.

Solid level 30% The solid level is the amount of material left, including polymer film, waxes, plasticizers, leveling resins, etc. after everything volatile has left the film, such as water or co-solvents. Most acrylic floor finishes contain a solid content ranging from 16 to 22 percent, while recently the industry has been drawn to high solid content that is around the 30 percent level. Acrylic sealers are ideal for projects where easy application and economy are important. They can be used on both interior and exterior surfaces to form a thin, protective film that provides good protection against water and chloride intrusion while permitting moisture in the slab to escape.

Acrylics are usually much thinner than polyurethane sealers and epoxy coatings, so they wear faster and usually require reapplication sooner. Solvent-based acrylics generally perform better than water-based products for outdoor use and will enhance the color better than water-based products. Weatherskin Acrylic Sealer has an excellent weather ability. Both air and surface temperatures play a role in proper curing when applying sealers in both cold and hot weather, but surface temperature is typically more critical.

After application, sealers undergo a chemical reaction that causes them to cure and form a film. Temperature plays a critical role in how fast or even whether this reaction occurs. The best temperature range for applying sealers is 10 C (50° F) to 30C (87°F). Weatherskin Acrylic Sealer can be used on mechanically textured concrete, exposed aggregate, stone, walkway, driveways, patios, balconies, and basements.

Weatherskin Acrylic Sealer is also UV resistant, has excellent weather ability have an and non-yellowing resistance. It can reduce dust formation, to protect substrate from contamination. Available in clear color with a glossy finish it has a wet look.

Key Features

CFIA Approved

(Canadian Food Inspection Agency) For use in Registered Establishments handling and processing food stuffs.

High Solids Content

High solid content around 30 percent level vs most competitive products at 12-20%.

Durable

Weatherskin Acrylic Sealer has an excellent weather ability.

UV Resistant

Designed with incredible UV resistant and is resistant to yellowing.

Easy Application

Weatherskin Acrylic Sealer is easy to apply.

Interior & Exterior

Weatherskin Acrylic Sealer can be used on both interior and exterior surfaces.

Dust Reduction

Weatherskin Acrylic Sealer can reduce dust formation.

Easy Recoat

Weatherskin Acrylic Sealer is easy to re-coat.

Clear

Available in clear colour with a glossy finish for that wet look.

OFFERING YOU THE HIGHEST STANDARDS

weatherskin-zero_impact-150x150.png
weatherskin-zero_vocs-150x150.png

Weatherskin understands the importance of conservation and are committed to playing our part by producing and applying products that are environmentally sound. In addition to our eco-friendly product line, Weatherskin practices green application.

Our products have almost zero VOC’s and are safe for not only the environment, but also for the people and animals who may come in contact with it.

WEATHERSKIN’S PROPRIETARY PRODUCT LINE IS IN FULL COMPLIANCE WITH:

  • FDA (Food and Drug Administration)

  • CFIA (Canadian Food Inspection Agency)

  • CHFA (Canadian Health & Food Administration)

  • CDSA (Controlled Drug & Substances Act)

  • FDR (Food & Drug Regulations Act)

  • NHPD (Natural Health Products Dept)

  • NCR (Narcotic Controlled Regulations)

  • ACMPR (Health Canada)

  • LEED (Leadership in Energy and Environmental Design)

  • USGBC (United States Green Building Council)

  • CaGBC (Canadian Green Building Council)

WEATHERSKIN’S PROPRIETARY PRODUCT PERFORMANCE TESTING PERFORMED THROUGH:

  • ASTM (American Society for Testing & Materials)

  • UL (Underwriters Laboratories)

  • ULC ( Underwriters Laboratories of Canada)

  • ISO (International Organization for Standardization)

  • CFIA (Canadian Food Inspection Agency)

  • AMETEK Brookfield

  • INTERTEK Canada

CERTIFICATIONS

leed-logo-1-100x111.jpg
weatherskin-cor-logo-150x150.png
chfa_logo-120x57.png
fda-logo-300x72.png
cfia-logo-260x123.jpg
leed-logo-2-100x100.jpg
sif-label-logo-challenge.png